How to find us
Our story
In 1990, a group of innovative engineers founded an engineering company with the aim of designing and implementing their own innovative, technical and technological developments. Since its foundation, our company has closely cooperated with the Academy of Sciences of Ukraine and has a wide range of consultants in various fields, which allows us to successfully implement the most complex, innovative projects. And to this day, the spirit of pioneering, based on the synergy of science, production, implementation and operation, unites the ambitious team of our company.
√ Production of 4 boiler air heaters E-1/9G – for the Municipal Enterprise “Kyivteploenergo”
Kyiv
Air heaters of E-1/9G boilers, heat recovery units – steam generators of bakery ovens.
Customers:
“Kyivhlib” JSC, Kyiv;
OJSC “Karavai” Luhansk
Air heaters for E-1/9G, E-2, 5/9G, DKVR-10/13, DE-16/14 boilers.
Customers:
Kozlivskyi, Marylivskyi (Ternopil region), Zaluchanskyi (Ivano-Frankivsk region) distilleries;
OJSC “Globyne meat processing plant”, Poltava region, Globyne.
Heat recovery units -water heaters for DKVR-10/13 and DE-10/14 boilers.
“Condensate-air for combustion” heat recovery units for two DE-10/14 boilers.
Customer: JSC “Kyivmedpreparat”, Kyiv
Air heaters for boilers – 5 pcs.
Customer:
Locomotive depot “Ternopil”,
Ternopil
Air heaters for E-1/9G boilers – 10 pcs.
Air heaters for E-1/9G boilers – 2 pcs.
Air heaters for KVH-7,56-150 boilers – 3 pcs.
Customers:
JSC “Zhytomyrhlib”, Zhytomyr;
CJSC “Shpolyansky Zavod Prodtovariv”, Cherkasy Region, Shpola;
Municipal Enterprise “Berezanteplomerezha” Kyiv region, Berezan city.
Air heater for OP-50 (50 t/h) boiler – 1 pc.
Air heater for the drying unit – 1 pc.
Customers:
Zbaraz sugar factory
Ternopil Region, Zbarazh:
OJSC Cheksil, Chernihiv.
Air heaters for E-2.5/9G boilers – 3 pcs.,
for “Kagma” Firm, Kyiv Region, Kagarlyk
Air heaters for boilers and furnaces – 22 pcs.
Customers:
OJSC “Shumsky Maslozavod” Ternopil Region, Shumsk;
JSC “Kyivkhlib” (bread factories No. 2, 10, 12, Skvyrskyi h/k, etc.);
OJSC “Karavai” Luhansk;
Concern “Dniproteploenergo”, Dnipro;
JSC “Promprylad”, Ivano-Frankivsk.
Air heaters for E-2.5/9G boiler, water heater for TVG-8M boiler.
Customers:
ATZT “Korosten porcelain”, Zhytomyr region, Korosten;
Municipal Enterprise “Kyivteploenergo” Kyiv;
CJSC “Avtoport-Chop”, Uzhhorod:
Concern “Dniproteploenergo”, Dnipro.
Air heaters for E-2.5/9G boilers – 6 pcs.
General heat recovery units-water heater for two steam boilers.
Customers:
JSC Lubna Dairy Plant, Poltava Region, Lubny;
CJSC “Moloko”, Ternopil Region, Kremenets;
OJSC “Prylutsky Hlibozavod”, Chernihiv Region, Pryluky.
Air heaters production for TVG-4R, E-1/9G boilers.
Customers:
Municipal Enterprise “Kyivteploenergo” Kyiv;
CJSC “Shpolyansky Zavod Prodtovariv”, Cherkasy Region, Shpola;
Concern “Dniproteploenergo”, Dnipro;
OJSC “Polyssyakhlib”, Rivne.
Water heaters for boilers and furnaces – 19 pcs.
Customers:
OJSC Lubenskiy dairy zd
Poltava Region, Lubny;
JSC “Kyivhlib”
(bread factories No. 2, 10, 12, Skvyrskyi h/k, etc.);
Ternopil locomotive depot, Ternopil
Heat recovery units for the drying unit.
Customer:
“Albatross” LLC, Dnipro
√ Installation of a new heating oil filtration station.
EPS contract design and construction works, production and supply of technological equipment, chief installation and commissioning works on modernization of the fuel line of the heating oil industry 1st stage.
Installation of a new fuel oil filtration station
Installation of a new pumping station of the 2nd lift of fuel oil
Installation of modified fuel oil burners and fans.
Installation of a SEP-5M cavitation emulsifier with a dosing unit for additives and commercial water.
Customer JSC “Dashukiv Bentonites” 
√ Development of the project, the plan of execution of works and the implementation of works on the liquidation of the fuel oil industry.
The EPS contract “Development of the project, work plan and implementation of work on the liquidation of the fuel oil farm (reservoir park of 16,000 m3, unloading railway trestle, pumping station and fuel oil supply lines for production) of the cement plant with a complex of robots for the rehabilitation of the territory has been completed.
The customer is “Volyn Cement” OJSC.
√ 2 heat recovery units on heat pipes were put into operation
2 heat recovery units on heat pipes have been put into operation. They are used as an air heater for a steam boiler.
√ For the methanol regeneration line in the natural gas drying process.
The customer is the Shebelinsky gas processing plant
General contractor LLC “Garantia – Holding 
Own mechanical and assembly production was put into operation, which includes the following areas:
1. Section of metal preparation
2. Milling section
3. Turning area
4. Welding posts, including argon welding
5. Locksmith and locksmith-assembly sites.
6. Electrical installation site for assembling electric panels and KVP panels
The following equipment was purchased and installed:
• vertical and horizontal milling machines,
• drilling machines,
• lathes,
• grinding machines,
• pendulum saws;
• pipe bends,
• leaf folds,
• guillotines,
• rollers,
• welding devices (stationary and portable semi-automatic devices, devices for argon welding, gas welding and electric arc welding devices).
Now we carry out work on the manufacture of individual units, parts and equipment from the Customer’s design documentation, as well as those developed by our own design department.
Currently, the production program of our enterprise provides for the production of the following equipment:
– Heat recovery units of outgoing, dry and condensing gases for boilers from 1 to 30 MW/h.
– Complexes of KVP equipment for installation on gas heat utilisers.
– Block and modular boiler houses from 1 to 5 MW/h, gas and solid fuel.
– Complex systems of automation and dispatching of boiler houses.
– Stations of frequency regulation on electric drives.
– Chemical water treatment and deaeration systems.
– Cavitation devices SEP-2, SEP-10M, SEPV-10, SEP-12.
– Stations based on AVALON-10D and AVALON-50 cavitators.
– Multi-stage technological heat recovery units.
– Individual heat points of different productivity. 
√ Design and construction work, production and supply of technological equipment, chief assembly and commissioning work on the modernization of the fuel line of the fuel oil industry, the 2nd phase.
Installation of fuel oil heaters based on heat pipes in furnaces of rotary furnaces.
Installation of a heating oil accounting system and automation of the burning process 
√ The work project “Reconstruction of the transport workshop and spare parts warehouse of OJSC “Municipal Machine Building Plant” under the service station of SE “AVTO International” on str. Pshenychna, 4 in Kyiv”
General contractor of PMP “Energoproject”
Construction customer JSC “Plant of Municipal Engineering”
The project envisages a capital repair of the mentioned building with its subsequent use as a maintenance station (STO) for Mazda and Suzuki cars.
The project of capital repair of the complex of buildings of the transport workshop of JSC “Zavod Komunalnogo Masinobuduvannya” was carried out on the basis of architectural and construction decisions adopted in accordance with current norms, rules and standards.
The complex of buildings and structures of the transport workshop consists of:
– the immediately existing building of the transport workshop, the dimensions of which are 18.0×78.0 m in plan, the height to the bottom of the load-bearing structures of the covering is 6.4 m, one-story with a built-in second floor for the placement of administrative and household premises;
– the houses of the checkpoint (checkpoint) are one-story, the dimensions are 4.5×9.0, the height of the premises is 3.0 m.
√ The contract for the development of the primary oil processing plant was completed.
The contract “Develop technology, equipment design, regulatory and technical documentation and a working project of improvement with bringing the actual capacity of the industrial complex for raw materials to 50,000 tons/year” has been completed. To manufacture in metal and deliver to the customer the equipment of the installation within the framework of its reconstruction scheme.”
The customer is “Internafta” LLC NVP
General contractor of “Garantia – Holding” LLC.
√ EPS contract for the technical re-equipment of the workshop of the production premises of JSC “Dashukiv bentonites” and the construction of the “Research-experimental technological line for the production of high-quality bento powders”
This contract covered not only the design, manufacture of equipment parts, installation and construction of a new production shop, but also engineering and design searches, since similar technology did not exist. Fully automated production makes it possible to produce industrial batches of products with new characteristics and properties.
√ The working project of the “Wagon dumper of the Utility Operating Enterprise “Chernihiv CHP” of the “TehNova” LLC”
The project of the construction of the wagon dumper building was carried out on the basis of architectural and construction decisions adopted in accordance with the task of the Air Force – 93.00.00.00. LLC DB OGK KB-3 of the plant-manufacturer of installed equipment of KP “ZEMZ” and developed in accordance with current norms and rules. The wagon dumper building is located on the territory of the open coal warehouse of the CHPP and is equipped with an access railway track and a retractable dead-end railway overpass.
√ The working project of “Defrosting device of the Utility Operating Enterprise “Chernihiv CHP” of the “TechNova” LLC”
General contractor of PMP “Energoproject”
The customer of the construction is the “TechNova” LLC
The project complex “Defrosting device of the Utility Operating Enterprise “Chernihiv CHP” of the “TechNova” LLC” includes the construction of objects: – Building of the defrosting device; – Building of the operator’s office; – Water absorbing well; – General engineering networks. Building of the defrosting device intended for heating coal in railway four-axle wagons with a carrying capacity of 60 tons due to radiation from side, ceiling and lower water pipeline screens.
√ “Development of technical design documentation for the production of a burner with a recirculation system.”
within the framework of the scientific project:
“Development of powerful methods and equipment to reduce emissions of nitrogen oxides.”
CHP with power units of 100-300 MW, which provide the possibility of their integration into
European energy system”.
program “Scientific and technical problems of integration of the energy system of Ukraine into the European energy system”.
The customer is the Gas Institute of the National Academy of Sciences of Ukraine.
√ Development of technology, hardware design and technological documentation of the process of preparation and disposal of spent oil products from ponds – accumulators.
Fabricate in metal, assemble and carry out maintenance and adjustment works of the installation of primary preparation and disposal of spent oil products from ponds – accumulators.
√ Received a patent for a useful model of a cavitation rotor apparatus with vacuuming.
√ LLC “Sakura I” project in terms of design, development and release of working documentation for the construction of fire furnaces for testing building structures and materials. The work was carried out for the construction of a testing laboratory, which became the first high-level fire testing center in Ukraine. The center that conducts certification tests of construction products.
√ Cavitation devices of the SEP series have been assigned the UKTZED code by the Chamber of Commerce and Industry of Ukraine
√ Delivery of the first powerful station for cavitation treatment of industrial effluents based on SEPV devices with a total capacity of 50 m3/h was carried out. The station is intended for the processing of technological effluents of the biomethanol plant.
“NizhynTeploMerezhi” LLC
Equipment of the water treatment system of boiler units “AVALON-10D deaeration station”
AVALON-10D based on SEP-10V cavitation apparatus
√ The complex of start-up and adjustment works was completed and the first experimental and industrial research laboratory of hydraulic cavitation processing in Ukraine was put into operation.
The All-Ukrainian State Research and Production Center for Standardization, Metrology, Certification and Consumer Rights issued a certificate of certification of our laboratory.
Therefore, our company has the only certified mobile laboratory in Ukraine for conducting research and industrial experiments on cavitation treatment of various liquid media under specified technological conditions: temperature of the working environment, pressure, flow rate, introduction of additional additives and mixture components. The laboratory has two independent cavitation units of different performance with all the necessary technological equipment, including pumps, pipelines, heat recovery units, storage tanks and regulatory equipment. In addition, there is a telemetry system for determining more than 50 technological parameters of the experiment and programmable automation for research within the given technological parameters. All of this allows mobile solutions to the Customer’s specific tasks, including the possibility of connecting to the technological scheme of a working enterprise in order to evaluate the real efficiency of the equipment and optimize it taking into account the specifics of operation at the stage of launching into production.
√ The contract for the overhaul of the PTVM-30M boiler with the replacement of radiative and convective boiler heating surfaces and restoration of the boiler lining and lining has been completed. Customer NizhinTeploMerezhi Open Joint Stock Company
√ Our company has completed the project of implementing a biogas collection and utilization system at the solid waste landfill in Chernihiv. The first start-up complex of the project envisages the installation of a flare installation with a capacity of 4,000 kW. The second complex is the construction of a gas furnace and a district boiler house with cogeneration units based on Capstone microturbines.
Drilling of gas wells at the landfill has begun.
3 UTKP-type heat recovery units with a total capacity of 3 MW have been put into operation. 
It is Europe’s first innovative modular system, working name “Solar-Wind”, which forms a canopy of solar protection material over large surface areas. The system is made on the basis of light, elegant cable-stayed structures that perfectly fit into the architecture of buildings and structures. The main task of the system is to create a favorable microclimate for plants and people.
√ Our company signed a dealer contract with White Rose Motor Otomasyon San. Tic. Ltd. the leading manufacturer of access control systems in Turkey.
√ An agreement was concluded with the company NF Trading AG Switzerland to conduct a complex environmental and technical audit of 17 objects in Ukraine on the naturalness of creating on their basis logistic complexes for the storage and packaging of mineral fertilizers, with the development and provision of an expert opinion. Development of a typical project of a logistics complex for storage and packaging of mineral fertilizers and pesticides on the territory of Ukraine.
√ 5 UTKP type heat recovery units with a total capacity of 5.5 MW were put into operation. 
General contractor “INTEK ENGINEERING” LLC
Construction customer “TOKMAK SOLAR ENERGY” LLC 
√ According to the results of the international economic rating “League of the best” and the data of state statistics, our enterprise received the award “Enterprise of the Year 2012” for achieving an advantage over competitors in the nomination “Activities in the field of engineering”.
√ 4 UTKP type heat recovery units with a total capacity of 3.2 MW were put into operation. 
√ Received a grant under the Business Consulting Services program of the EBRD (BAS) Ukraine.
Participated in conducting an independent examination on the reduction of greenhouse gas emissions according to the Kyoto Protocol
√ We received the certificate for the sign for goods and services No. 171021. 
√ 15 frequency control stations at 10 facilities were put into operation. 
√ Work has begun according to the EPS contract for the construction of the heat supply system, st. regiment. Konovaltsia in Bila Tserkva with the installation of a modular boiler house.
Work has begun in accordance with the EPS contract for the construction of an individual heat supply source of the microdistrict with the reconstruction of the heat supply systems of residential buildings No. 3, 5 and 9 on the street. P. Konovaltsia in the city of Bila Tserkva, with the construction of a 2.5 MW automated unmaintained boiler house, replacement of heating lines, construction of individual heating points in houses.
√ Project and working documentation “Reconstruction of the building of the Universal Spectacle Sports Palace “Meteor” in the city of Dnipro”
General contractor of SE “Dnipro Project Institute”
The customer of the construction of the SE “Dniprovsky Project Institute”
Development of the following sections of project documentation:
– Cold supply;
– Ventilation of ice fields;
– Automation and dispatching of cold supply and ventilation systems of ice fields;
– Estimated documentation.
√ Completed development of the Solar-Wind system project for FC Krasnodar Russia. In connection with the reduction of the construction budget, the general contractor decided to design a system similar to “Donbas Arena”
Works on the implementation of complex systems of frequency regulation of smoke extractors and fans at 18 boiler houses of the Communal Enterprise “BCTM” in Bila Tserkva have been completed.
EWIX
Spółka z ograniczoną odpowiedzialnością
42-450 Rokitno Szlacheckie
ul. Świerczewskiego 14b KRS: 0000516999 NIP: 6492300282 REGON: 243621024
tel kom. +48 519 818 569; +48 507 519 985
tel/fax +48326732033
webiste; www.ewix.eu, ewix.pl, ewix.com.pl
Regional Director Piotr Suwalski
√ A contract was signed for the development, manufacture and supply to a European customer of the universal cavitation, technological station “AVALON-20U”.
√ 4 heat recovery units of the FGR type with a total capacity of 5.7 MW were put into operation. 
Our company completed the development and issued a patent for the automated cable shelter system “Solar-Wind”. The system provides automated installation and disassembly of the cable-stayed field shelter and is operated by a one-person staff.
This year, our company’s cooperation with the STRI etc Institute, which is FIFA’s natural turf consultant, allowed us to include the “Solar-Wind” system in the specifications for the construction of the Lusail Stadium (Doha, Qatar) World Cup 2022 Qatar.
We have started cooperation with the State Enterprise “ANTONOV”. The tender for the development of a working project of a boiler house with a thermal capacity of 2.0 MW on biofuel (wood pellets) at the address of the urban-type village of Hostomel, Avtodorozhna St, 5
Our company has implemented and uses a quality management system. According to the audit conducted by DQS GmbH Deutsche Gesellschaft zur Zertifizierung von Managementsystemen, we were awarded the ISO 9001:2015 certificate: Development, production and implementation of energy-efficient, energy-saving equipment and technologies, providing engineering services, services of a general designer and contractor in the field of energy use and energy saving.
√ On 05/28/2018, an emergency situation occurred in the city of Kremenchuk, the chimney of the district boiler house belonging to KP “Teploenergo” fell. The whole district of the city was under threat of lack of heating. Our company has been cooperating with the city for many years, so we immediately responded to the proposal of representatives of the city council to carry out works to restore the efficiency of the boiler house. In difficult conditions, the EPS contract for the design, manufacture and installation of a new chimney was completed in a very short time.
An agreement was concluded with the company “Alfa Laval Aalborg A/S” to conduct technological tests of the SEP-10M cavitation apparatus at the “Aalborg” test center in Denmark. SEP-10M was delivered to Denmark.
Alfa Laval’s world-renowned marine test and training center in Aalborg, Denmark, concentrates today’s innovations, creating a springboard into the future. Here, equipment, programs and process lines are tested at the scale of an ocean-going vessel – with control and convenience not possible at sea.
The 1,350 m2 test space offers a wide range of possibilities. One part is a full-scale engine room simulation with Alfa Laval products integrated into the main process lines around the ship’s 2MW diesel engine. Another, which reflects the growth of LNG and other gaseous fuels, focuses on combustion technology in burners, heating systems and inert gas systems. Seawater for all systems comes directly from the Limfjord, which connects the Kattegat Strait to the North Sea.
A single integrated control system connects all equipment with the control room and training complex. Thus, Alfa Laval can use part or all of the center for specific purposes, from evaluating individual customer configurations to laying the foundation for new solutions in the field of energy saving, safety and environmental protection.
Training for today or innovating for the future, the Alfa Laval Test and Training Center creates real opportunities.
√ Our company won the tender for the pre-project evaluation of the actual heat load of the Rakivka housing estate in Kremenchuk
In accordance with the terms of the Priority Investment Program (PIP), which is implemented on the basis of the contract between the city of Kremenchuk, KP “Teploenergo”, NEFCO, Danida Business Finance and based on the Feasibility Study report performed by the Ramboll company, the implementation of the investment project has begun, in the warehouse.
– EUR 6.5 million loan from NEFKO;
– a grant in the amount of EUR 3.5 million (35%) from Danida Business Finance;
– EUR 2.7 million of local financing, including VAT coverage.
According to the work plan, a tender was held in June 2022 to carry out a complex of works for the implementation of the project, and financing was opened at the end of the year.
The technical components of the PIP include:
1) Biomass boiler house with a capacity of 1 x 4.0 MW,
2) 2 x 20.0 MW boiler house on natural gas (2 water heating boilers with dry economizer)
3) 3,000 m3 low pressure steel storage tank
4) Network improvements by changing from a 4-pipe system to a 2-pipe system. In addition, 710 m of transit pipes are needed to connect six new heating points.
5) 122 modern heating points, of which 84 are individual heating points, both for space heating and for DHW, 21 group heating points, 4 ITP only for DHW and 13 for space heating.
6) System of centralized dispatch control and data collection (SCADA)
√ The Association for Economic Cooperation and Development of Entrepreneurship decided to recognize the most important enterprises in accordance with KVED 71.12 “Activities in the field of engineering, geology and geodesy, provision of technical consulting services in these areas.”
Our company is included in the list of significant and priority companies of the industry and is a high-quality supplier of goods and services in the region (Kyiv). Considering this, the organization is recommended for cooperation at the national and international level.
For the excellent quality of services that are in high demand among consumers, which are confirmed by the register of the best suppliers of goods and services, the company was recommended to the National Program “Consumer’s Choice 2018”.
Our company has completed another EPS contract for the design, manufacture, installation and commissioning of two heat recovery units for a glass melting furnace with a capacity of 25 MW.
customer LLC “Malynyvskyi Glass Plant” general contractor LLC “Scientific and Production Enterprise “TERMOPROM”.
This is one of our oversized waste heat recovery units, the total capacity of heat recovery units is over 1 MW.
By order of the Municipal Enterprise “TEPLOENERGO” of the Kremenchuk City Council of the Kremenchuk District of the Poltava Region, we performed a set of robots to analyze the possibility of using existing heat generation capacities to create a backup emergency heat supply system for the left-bank part of the city of Kremenchuk.
With the help of this program, the city of Kremenchuk managed to attract 5 million euros of aid from the Danish government, and 40 MW of thermal power reserve was created in block-modular design of 4 MW per block.
√ We received the certificate for the mark for goods and services No. 312477. 
In 2023, the company completed an international contract commissioned by the Viessmann company, financed by the government of the Kingdom of Denmark under the control of NEFCO, for the production of five block-modular gas boilers with a total capacity of 20 MW. The contract was completed within the agreed time frame without quality issues.
√ Our company won the tender for the development of an emergency backup heat supply system in Bila Tserkva.
This is a project that covers the entire heat supply system of the city with the design of new heat networks connecting 13 existing heat stations, construction of new heat stations with a total capacity of over 116 MW.
The purpose of this large-scale work, which covers the critical infrastructure of the city with a population of over 200,000, is to involve donor organizations, international technical and humanitarian aid projects operating in Ukraine during martial law.
Which offers you its experience, high professionalism and impeccable reputation. We develop dynamically and anticipate the needs of the Ukrainian energy sector. The company is the leader of Ukraine in the production of complex condensation systems for waste gas heat utilization.